Octoplus FRP Tool Activation
This activation enables FRP (Google Factory Reset Protection) reset operations for Samsung, Huawei, Xiaomi, LG, Alcatel, Motorola cell phones. You can add this activation for any box or dongle from Octopus / Octoplus / Medusa. Activation period: lifetime.
Factory FRP service is offline! Free of charge FRP offline method is available for many US models and QC models via EDL (check full supported models list) and many MTK models via Download Mode (check full supported models list)
Activation for Octopus Box, Octoplus Pro Box, Octoplus Box, Octoplus Dongle, Medusa Pro II Box, Medusa Pro Box and Medusa Box enables FRP (Google Factory Reset Protection) reset operations for Samsung, Huawei, Xiaomi, LG, Alcatel, Motorola cell phones.
How to Activate Octoplus FRP Tool?
When we confirm your payment and process your order, we will send your activation code and detailed instructions to your email.
Reset FRP for Samsung
1. Reset FRP UART (UFS chips)
This operation WILL NOT reset/delete device user data.
To perform “Reset FRP UART (UFS chips)” operation, do the following steps:
- Put the phone in Download Mode (power off the phone, press and hold “Volume-” + “Home” + “Power ON” buttons) and connect USB cable.
- Press “Reset FRP UART (UFS chips)” button.
- After Software request disconnect USB cable and connect Samsung Micro UART cable.
- Press and hold “Volume-“ + “Power ON” keys for 15-20 seconds, Software will automatically close wizard window and will perform the reset FRP lock.
- Done.
2. Reset FRP ADB (Combination)
This operation WILL NOT reset/delete device user data.
To Reset FRP lock using combination firmware, you can try to do the following:
I.
- Write “boot.img” partition from appropriate Combination firmware.
- Perform “Reset FRP ADB (Combination)” operation in the software.
II.
- Write full Combination firmware.
- Go to “Developer Options” in the phone’s Settings.
- Check “Enable OEM …” option.
- Perform Factory Data Reset.
- Reflash the phone with full stock (original) firmware.
Note: “boot.img” from combination firmware can be not compatible with current phone’s firmware. In that case phone will freeze on logo, or will be rebooting after writing of such boot. To restore the phone to its initial condition you need to reflash it with different full stock (original) firmware (or try to write only boot of such firmware).
Also note: You can write “boot.img” combination firmware or downgrade phone’s firmware version only at your own risk!
P.S. If you cannot find combination firmware for your model in “SAMSUNG/COMBINATION” folder in Support Area, this means we don’t have these files at the moment. As soon as we get new combination firmwares, we will upload them into the Support Area.
3. Reset FRP (Download Mode)
Be careful, performing this operation WILL DELETE all user data (contacts, pictures and other) from the device!
To perform the Reset FRP (Download Mode) operation, do the following:
1. Click “Reset FRP (Download Mode)” button.
2. Put phone in Download Mode (power off the phone, press and hold “Volume-“ + “Home” + “Power ON” buttons).
3. Connect the phone to PC via Micro USB cable.
4. Follow Software instructions (prompts).
4. Reset FRP UART (eMMC chips)
This operation WILL NOT reset/delete user data on the device.
To perform the Reset FRP UART (eMMC chips) operation, do the following:
- Click “Reset FRP UART (eMMC chips)” button
- Connect the phone to Box via UART cable
- Press and hold “Vol-” and “Power” buttons for 15-20 seconds
- Wait until software requests to connect USB cable
- Connect the phone to PC via USB cable. Software will read some data
- Connect again the phone to Box via UART cable
- Press and hold “Vol-” and “Power” buttons for 15-20 seconds
- Follow software instructions (prompts)
Reset FRP for Huawei
Be careful, performing this operation may reset/delete all user data (contacts, pictures and other) on some devices and firmware versions! Software will inform you about this in log, so please read and follow software instructions (prompts) carefully!
To perform the Reset FRP operation, do the following:
- Remove SD and SIM cards from the phone.
- Put the phone in FastBoot Mode (power the phone OFF; press and hold “Volume-“ button, insert USB cable and wait until the phone goes in FastBoot Mode).
- Install necessary driver.
- Click “Reset FRP” button
- Follow software instructions (prompts).
Reset FRP for LG
“Reset FRP” operation. Be careful, performing this operation may reset/delete all user data (contacts, pictures and other) on some devices and firmware versions! Software will inform you about this in log, so please read and follow software instructions (prompts) carefully!
To perform the Reset FRP operation, do the following:
1. Remove SD and SIM cards from the phone.
2. Put the phone in Download Mode (power the phone OFF, press and hold “Vol+” button and connect USB cable).
3. Install necessary driver.
4. Click “Reset FRP” button.
5. Follow software instructions (prompts).
Reset FRP for Alcatel
This operation will not reset/delete device user data.
To perform the Reset FRP operation, do the following:
- Remove SD and SIM cards from the phone.
- Install necessary driver.
- Power the phone OFF and connect USB cable.
- Click “Reset FRP” button.
- Follow software instructions (prompts).
Reset FRP for Motorola
This operation will not reset/delete device user data.
To perform the Reset FRP operation, do the following:
- Put the phone in Factory Mode (power the phone OFF; press and hold “Vol-” + “Power” buttons; select “Factory Mode” in phone’s menu and confirm selection; wait until the phone powers ON).
- Connect USB cable.
- Install necessary driver.
- Click “Reset FRP” button.
- Follow software instructions (prompts).
Reset FRP operation may not work for some devices with the latest Security patch level.
Reviews
There are no reviews yet.